Oltre Lathe Chuck Adaptor M30 x 3.5mm (Female) To 1" x 10TPI (Male) Line Spool Shorter times are required under

Shorter times are required under ideal conditions when using soft wood species at moisture content slightly less than eight to ten percent and factory temperatures of 68 degrees Fahrenheit/ 20 degrees Celsius

90 °/45 ° (W x H): 211mm x 112mm

Free from harmful chemicals like chlorine and formaldehyde

0AH REDLITHIUM-ION Battery (M18B5)

Set-up times are short since saw blades and accessories can be changed without the need for additional equipment

Oltre Lathe Chuck Adaptor M30 x 3.5mm (Female) To 1" x 10TPI (Male) Line Spool Shorter times are required underSuitable to utilise 1"10TPI Chucks on MC1218VD Lathe or Similar with M30xP3. 5 Thread Allows the use of old imperial chucks on new metric lathes. Please note you will loose approximately 40mm of travel on your lathe bed using this adapter. All pictures shown are for illustration purpose only.